Kurabo QuickGene-Auto240L, Operation Manual

Page: 67 / 78

3 Operation Procedures - Full Auto Protocols
53
QuickGene-Auto240L Operation Manual
3
(C-1)
Set collection tube holder A in collection tube holder
slot A.
・
Securely set the collection tube holder until it contacts
the stopper on the end.
・
The pop-up window will disappear when the collection
tube holder is set in a correct slot.
(C-2)
If there are more holders to set, press [NEXT] and
carry out (C-2), (C-3) for holders B, C.
(C-3)
Confirm that all the holders are set in each slot and
press [COMPLETE].
When the positions of all the collection tubes and samples
(blood collection tubes) coincide, the [COMPLETE]
button will be enabled.
(C-6) The number of samples whose IDs are read out will be
indicated in the pop-up window. If they are correct,
close all the doors and press [OK].
(C-7)
Go to the next section “<4> Confirmation of Reagent”
D. When the collection ID reading function is OFF
Note:
When the collection ID reading function is OFF, refer to “3.4 Consumables and Accessories”
and set the collection tube holders before turning system power ON.
(D-1)
Go to the next section “<4> Confirmation of Reagent”