Kurabo QuickGene-Auto240L, Operation Manual

Page: 32 / 78

2 Basic Functions
18
QuickGene-Auto240L Operation Manual
2
No. Screen Description
6
■ User ID Delete Screen
Displayed when deleting a User ID.
Touch the white frame of [USER ID] and select a registered user ID. Then touch the white
frame of [EXPERT PASSWORD] to display a ten-key entry pad, enter a password for an expert
and press [ENT]. Finally, press [DELETE] to delete a User ID. Please contact our sales agent
regarding the password for an expert.
7
■ Mode Select Screen
Displayed when selecting various modes. Press a button to move on to one of the modes.
・
[AUTOMATIC OPERATION]
：
The mode for isolating operation
・
[OPERATING HISTORY]: The mode for checking operating history, checking ID information
and storing data
・
[PARAMETER SETUP]: The mode for confirmation and setup of operating conditions and
parameters
・
[MAINTENANCE]: The mode for confirmation of functioning for maintenance and other
setups.
All the door locks will be canceled by pressing [UNLOCK]. While the door lock is canceled,
parts of functions are restricted. The doors are locked again when the door is closed.
8
■ Protocol Select Screen
Displayed when the isolating operation protocol is selected.
[FULL-AUTO] is a protocol for automatic operation from the blood collection tube,
[SEMI-AUTO] is a protocol for starting from the status of lysate preparation complete and
[CUSTOM] is a spare protocol that allows the change of setups. Press [NEXT] to move on to
the next item, and [PREVIOUS] to return to a previous item.
9
■ Sample ID Check Screen
Displayed when reading ID information and detecting number of samples while the sample ID
barcode reading function is [ON].
ID information is read out from the barcode on the side surface of the blood collection tube
when setting a sample holder. The sample position will turn blue when the reading is
successful. If there is no gap in the order of detected samples, the [COMPLETE] button will be
enabled. The [NEXT] button will be enabled when all 8 samples in a holder are read, and the
next holder will be rendered acceptable for setting by pressing [NEXT]. Press [COMPLETE] to
move on to the next screen after confirmation of the number of samples.
10
■ Number of Samples Entry Screen
Displayed for entering the number of samples while the sample ID barcode reading function is
[OFF]. The color of a button will be reversed and the sample number can be selected by
pressing one of the sample numbers (1–24) or the buttons (A, B and C) for sample holder
names. Numbers smaller than the pressed one will be automatically selected. By pressing a
button with reverse color again, selection of the relevant sample will be canceled. Press [OK] to
move on to the next screen.