Kurabo QuickGene-Auto240L, Operation Manual

Page: 63 / 78

3 Operation Procedures - Full Auto Protocols
49
QuickGene-Auto240L Operation Manual
3
3.8 Isolating Operation
Operations before starting the isolation and operation after completion are explained below.
Refer to "3.3 Preparation of Reagents", "3.4 Preparation of Consumables and Accessories", and "3.5
Preparation of Samples" for necessary preparations for isolating operation.
<1> Start-Up of Automatic Isolating Operation Mode / Selection of Protocol
(1) Refer to " 3.6 Start-Up of System", turn ON system power, and
move on to the mode select screen.
(2) Press [AUTOMATED OPERATION]
(3) Press [OK] in the displayed pop-up window.
Check that the waste container in the system drawer is empty
and execute the automated operation mode.
(4) Press the full automatic protocol button to operate.
(Ex
：
W BLOOD DNA 2 mL FULL-AUTO)
Refer to "2.8 Implemented Protocols" for explanation on
protocols.
(5) Move on to the next section "<2> Enter Sample Information".