Kurabo QuickGene-Auto240L, Operation Manual

Page: 54 / 78

3 Operation Method - Full-Auto Protocol
40
QuickGene-Auto240L Operation Manual
3
■
Set the lysate tubes in the system
(1) Open the sliding door of the system.
(2) Open the agitator cover of the lysate unit.
(3) Set the number of lysate tubes equal to the number of samples.
(4) After setting the lysate tubes, close the agitator cover until a click is heard.
Note: Be sure to securely close and fix the agitator cover until a click is heard. If the fixing is
insecure, an error will occur during the system check before operation.
(5) Close the sliding doors
× ○