| 33
EN
OFF
N-coder
Waveform switching
button
TIG HF
DC
TIG DC
- Setting END CURRENT function
(end current)
The function indicates the current value at which the
welding process ends. Together with the DOWN SLOPE
function, it prevents the crater from forming at the end
of the weld when properly adjusted. Activation is perfor-
med by pressing the control n-coder one after the other.
OFF
N-coder
Waveform switching
button
TIG HF
DC
TIG DC
- Setting POST-GAS function
The function ensures protection of the weld after the
welding process is completed and at the same time it
cools the tungsten electrode. The low duration of the
function can affect the ignition quality of the arc due to
oxidation of the electrode. Activation is performed by
pressing the control n-coder one after the other.
OFF
N-coder
Waveform switching
button
TIG HF
DC
TIG DC
- Setting 2-STROKE function
The function indicates how the welding process is acti-
vated. When using this mode, it is necessary to press the
control button during welding, which sends a signal to
activate the welding process. Pressing the control button
starts the welding process and activates the sequence of
functions. Activation is performed by pressing the cont-
rol n-encoder one after the other.
OFF
N-coder
Waveform switching
button
TIG HF
DC
TIG DC
- Setting 4-STROKE function
The function indicates how the welding process is acti-
vated. When using this mode, it is necessary to press the
control button, which sends a signal to activate the wel-
ding process. The PRE-GAS function is then activated, fo-
llowed by START CURRENT. When the button is released,
the welding process starts by switching to WELDING CU-
RRENT and activating other active functions gradually. To
complete the welding process, press the control button
again to activate the DOWN SLOPE function and then the
END CURRENT function. When the button is released,
the welding process ends and the POST-GAS function is
activated.
