10. - Maintenance and storage
FC244R / FC244R HD
81
KN330CGB_A
Mower conditioner
When changing the oil, it is recommended to use
either an identical mineral oil or a synthetic oil of
type PAO (Poly-Alpha-Olefine) with viscosity
grade SAE75W90
- Remove the filler plug (1).
- Place a container of sufficient capacity under drain
plug.
- Remove drain plug (2).
- Allow oil to drain completely.
- Wait for dripping to stop.
- Clean and reinstall drain plug (2). Replace it if
necessary.
- Pour the correct oil quantity and quality through the
opening of the filler plug (1).
- Check central gearbox oil level:
• The oil must reach the lower edge of the filling
hole.
-
Clean and reinstall filler plug (1) and its
washer. (Replace if necessary).
10.3.3 Lubrication
- Lubricate with all purpose oil SAE80W90.
• The steering system pivot points.
2
1