10. - Maintenance and storage
FC244R / FC244R HD
79
KN330CGB_A
Mower conditioner
- Never use an oil of viscosity SAE 90 in the
cutterbar.
From the transport position:
- Unlock and raise front guard.
- For safety reasons, hook check chain as
high as possible.
- Remove the inner skid shoe (1) on drive side.
- Place a container of sufficient capacity under the
lower cutterbar end.
- Remove filler plug (2) and its washer.
- Raise cutterbar on opposite side of drain plug.
- Remove drain plug (3) and its washer.
- Allow oil to drain completely.
- Wait for dripping to stop.
-
Clean and reinstall drain plug (3) and its
washer. Replace if necessary.
- Reinstall inner disc skid (1).
- Pour the correct oil quantity and quality through the
opening of the filler plug.
- Clean and reinstall filler plug (2) and its washer.
Replace if necessary.
The side angle gearbox
- Before draining oil, operate the machine for a
few minutes so that the oil warms up.
FC244R / FC244R HD
Oil volume
0.70 L (0.18 US gal)
Type of oil
Mineral oil (Gear oil)
Viscosity
SAE80W90
Specification
API - GL5 (extreme pressure)
1
3
2
