4. - Safety
FC244R / FC244R HD
19
KN330CGB_A
Mower conditioner
Stage 4:
To measure:
- Load on rear axle (t2):
• T machine (transport position).
• Ballast weights.
Checking:
- Check in the tractor's operator's manual that the
value measured is below the maximum allowed
tractor rear axle load.
-
Check that tyre and rim specifiations are in
conformity with the requirements of the tractor
manufacturer.
Example:
• Load on rear axle (t2) = 8500 kg (18740 lb).
• Check in the tractor's operator's manual that the
value measured is below the maximum allowed
tractor rear axle load.
• Check that tyre and rim specifiations are in
conformity with the requirements of the tractor
manufacturer.
4.2.7 Maximum speed
- Always keep to the legal speed limit for driving a
tractor-machine assembly on public roads.
4.2.8 Precautions when coupling
- Before attaching the machine, make sure that it
cannot accidentally start moving (chock the
wheels) and that the parking stand is in the right
position.
- The machine must only be attached to the hitch
points provided for this purpose.
- Do not stand between the machine lower hitching
points or between the tractor lower hitching points
during coupling maneuvers.
- Never stand between the tractor and the machine
when operating the three point linkage.
- Do not stand between the machine and the tractor
or on the machine without having first applied the
tractor parking brake and placed the gearbox in the
neutral position.
kg
kg
t2 = _____kg
t2 > t2 max
t2 > t2 max
t2
t2
≤
t2 max
t2 max
t2 =
________
kg
