6. - Putting into service
FC244R / FC244R HD
47
KN330CGB_A
Mower conditioner
6.2.4 Coupling the machine
- Insert the 2 ball joints of the tractor on the
machine’s hitch pins.
Preferably use cone guide pins (1).
- Secure each hitch pin with lynch pin.
- Lower the tractor three-point linkage.
- Adjust levelling rods to position draft arms as close
as possible below the hitch pins (A = 30-50 mm (1-
2’’) max.).
- Lift the tractor lift linkage to connect the draft arms
to the hitch pins.
- Lock lower links.
- Rest the machine on its parking stand.
A
1
- Attach top link:
• To lower holes on tractor side.
• To upper holes on machine side.
This top link position provides good machine
ground clearance in transport position.
