KUHL Quantron E2, Original Instructions Manual

Page: 43 / 108

Operation of the Quantron E2
37
4
The main menu shows the following submenus.
Submenu Meaning/Possible values Description
Name of fertiliser Fertiliser selected from the fertiliser chart. Page 49
Application rate Input of target value for the application
rate in kg/ha. Page 39
Working width Determination of the working width to be
spread. Page 40
Flow factor Input of flow factor of the fertiliser used. Page 41
Drop point Input of the drop point. This display is only
for information.
For AXIS 50.1 W : electrical setting of the
drop point (DP).
Observe the op-
erating instruc-
tions for the
mineral fertilis-
er spreader
Page 43
Telimat quantity Pre-setting the quantity reduction for bor-
der spread. Page 44
Calibration start Calling up the submenu for executing the
calibration. Page 45
Disc type Selection list:
S2
S4
S6
S8
S10
S12
Selection using
the
arrow keys .
Confirmation
with
enter key .
PTO 540 rpm
Bound. sprdg type Selection list:
Border
Boundary
Selection using
the
arrow keys .
Confirmation
with
enter key .
Telimat boundary Saving the Telimat settings for boundary
fertilisation. Only for mineral
fertiliser spread-
ers with Telimat.
Way to spread Selection list:
Normal
Late
Selection using
the
arrow keys .
Confirmation
with
enter key .
Height setting Input in cm
Selection list: 0/6 40/40 50/50 60/60 70/70
70/76
Manufacturer Entering the manufacturer of the fertiliser.