Operation of the Quantron E2
4
42
3.
Confirm the input by pressing the
enter key
.
The new value is saved in the control unit.
4.
Press the
ESC key
to return to the
previous menu
or
press the
menu key
to return to the
operating screen
.
Resolving problems with the flow factor regulation (only AXIS W):
Under certain conditions, the display of the flow factor can freeze despite having
carried out the
weigh quantity
function. The following alarm message appears
in the display.
Figure 4.17:
Flow factor error message
Resolving the fault, see chapter
5.2: Clearing a fault/alarm, page 94
.
NOTICE
If your fertiliser is not listed in the fertiliser chart, enter the flow factor
1.00
.
In the
AUTO km/h
and
MAN km/h
operating modes, we strongly recommend
that you perform a
calibration
to precisely determine the flow factor for this fer-
tiliser.
NOTICE
On AXIS W (
Auto km/h + Auto kg
), we recommend displaying the flow factor
on the operating screen in order to observe the flow factor regulation during
spreading. See chapter
4.9.2: Display config., page 80
and
chapter
4.6.2: AUTO/MAN mode, page 56
.
n
CAUTION
Possible spreading error
This alarm message can lead to spreading errors which have a
negative impact on the environment.
immediately stop
the spreading process.
Summary of Contents for Quantron E2
