KUHL Quantron E2, Original Instructions Manual

Page: 71 / 108

Operation of the Quantron E2
65
4
4.6.3 +/- appl. rate
In this menu, you can specify a quantity change on a percentage basis.
The basis (100 %) is the pre-set value of the metering slide opening.
Figure 4.34: +/- appl. rate (%) menu
Specifying the quantity reduction:
1. Switch from the machine settings menu to the +/- appl. rate menu .
2. Enter the percentage by which you wish to modify the spreading quantity.
Entering values into the control unit is described in section 4.11.2: Input of
values using the cursor keys, page 89 .
3. Press the enter key .
NOTICE
During operation, you can use the function keys F2/F3 to change the spreading
quantity by the factor of the +/- appl. rate at any time.
Use the C 100 % key to restore the preset values again.