KUHL Quantron E2, Original Instructions Manual

Page: 16 / 108

Layout and function 2
10
The icons and displays in the example have the following meaning:
No. Icon/Display Meaning (in the example)
1 Metering slide
scale opening left Current opening position of the left metering slide.
2 Operating mode Shows the current operating mode.
Auto km/h uses the radar signal or wheel signal
for determining the speed.
3 Telimat icon This symbol appears if the Telimat sensors are fitted
and the Telimat function is activated (factory set-
ting) or the T key has been activated.
4 Quantity change
right Quantity change ( +/- ) in percent.
Display of quantity changes.
Range of /- 1..99 % possible.
5 Application rate Preset application rate.
6 Display fields Configurable display fields (here: forward speed, flow
factor).
Possible configuration: see
chapter
4.9.2: Display config., page 80 .
7 Icon fields Icons assigned to fields depending on the menu .
Selection of the function by means of the func-
tion keys located underneath.
8 Section left Display of status of left section.
Bar icon : Section left not selected .
Empty icon (contour): Section left selected but
not active.
Icon with red background: Section in spreader
operation .