KUHL Quantron E2, Original Instructions Manual

Page: 97 / 108

Alarm messages and possible causes
91
5
5 Alarm messages and possible causes
Various alarm messages can be displayed on the Quantron E2 control unit dis-
play.
5.1 Meaning of alarm messages
No. Message in display Meaning
Possible cause
1 Fault in metering system. The actuator for the metering system can-
not reach the set value it is to be moved to.
Blockade
No position message
2 Speed or application rate to
high. Metering slide alarm
The maximum metering opening is
reached.
The set application rate (+/- appl. rate)
exceeds the maximum metering open-
ing.
3 Flow factor lies outside ac-
ceptable limits. The flow factor must be within the range of
0.40 - 1.90 .
The newly calculated or entered flow
factor is outside this range
4 Hopper left empty! The level sensor on the left reports "emp-
ty".
The left-hand hopper is empty.
5 Hopper right empty! The level sensor on the right reports "emp-
ty".
The right-hand hopper is empty.
7 Data will be deleted!
Delete = START
Cancel = ESC
Safety alarm, to prevent the unintentional
deletion of data.
8 Minimum spreading quantity
of 150 kg not achieved. Old
factor valid. Flow factor calculation not possible.
Operating mode Auto km/h + Stat. kg
is selected.
The application rate is too low to calcu-
late the new flow factor when the re-
maining quantity is weighed.
The old flow factor is retained.
9 Min. setting = 10
Max. setting = 3000 Reference to the value range of the appli-
cation rate .
Entered value is not permitted.