Kubota G2160, Workshop Manual

Page: 49 / 395

G-35
G2160, WSM G GENERAL
Nozzle Tester
Code No: 07909-31361
Application: Use to check the fuel injection pressure and spray
pattern of nozzle.
Measuring: 0 to 50 MPa
range
(0 to 500 kgf/cm
2
, 0 to 7000 psi)
W1049783
Plastigage
Code No: 07909-30241
Application: Use to check the oil clearance between crankshaft and
bearing, etc..
Measuring: Green.....0.025 to 0.076 mm (0.001 to 0.003 in.)
range
Red........0.051 to 0.152 mm (0.002 to 0.006 in.)
Blue.......0.102 to 0.229 mm (0.004 to 0.009 in.)
W1049942
Red Check
Code No: 07909-31371
Application: Use to check cracks on cylinder head, cylinder block,
etc..
W1050024
NOTE
■
• The following special tools are not provided, so make them referring to the figure.
Valve Guide Replacing Tool
Application: Use to press out and press fit the valve guide.
W1050106
A 20 mm dia. (0.79 in. dia.)
B 9.96 to 9.98 mm dia. (0.3921 to 0.3929 in. dia.)
C 5.5 to 5.7 mm dia. (0.2165 to 0.2244 in. dia.)
D 200 mm (7.87 in.)
E 80 mm (3.15 in.)
F 40 mm (1.58 in.)
G 15 mm (0.59 in.)
H 5 mm (0.197 in.)
I 6.0 to 6.1 mm dia. (0.236 to 0.240 in. dia.)
J 18 mm dia. (0.71 in. dia.)
K 10.6 to 10.7 mm dia. (0.417 to 0.421 in. dia.)
L 7 mm (0.276 in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.3 mm (0.012 in.)
KiSC issued 11, 2006 A