Kubota G2160, Workshop Manual

Page: 341 / 395

P1-S29
G2460G, WSM ENGINE
(2) Carburetor
(A) Altitude Compensation Kit (Engine Serial No.: Above 1A0001)
Main Jet and Pilot Jet
1. Remove the carburetor.
2. Loosen the drain screw (3) to let fuel out.
3. Remove the gasoline solenoid (6).
4. Remove the main jet (5).
5. Install the high-altitude kit's main jet onto the carburetor.
6. Tighten the throttle adjust screw (4) and remove the screw (1).
7. Replace the existing pilot jet (2) with the high-altitude kit's pilot jet.
8. Install the gasoline solenoid (6).
9. Install the carburetor in place. (See page P1-S19.)
10.Readjust the governor. (See page P1-S27.)
11.Adjust the engine speed. (See page P1-S28.)
NOTE
■
• After install the carburetor, the adjustment of governor and
engine speed are executed. (See page P1-S27, S28.)
• Prepare a screwdriver that fits the main jet / pilot jet screws
in order not to damage the main jet and pilot jet.
• Replace the air cleaner packing and the carburetor packing
with new ones.
• Make sure there is no leak at the air cleaner packing and the
carburetor packing.
IMPORTANT
■
• Keep the carburetor inner parts which is removed from
standard carburetor.
W1018491
Tightening torque
Carburetor mounting nut
23.5 to 27.5 N·m
2.4 to 2.8 kgf·m
17.4 to 20.2 ft-lbs
Gasoline solenoid
7.8 to 11.7 N·m
0.8 to 1.2 kgf·m
5.8 to 8.7 ft-lbs
Main jet
1.0 to 2.9 N·m
0.1 to 0.29 kgf·m
5.0 to 15.2 ft-lbs
Pilot jet
1.0 to 3.9 N·m
0.1 to 0.40 kgf·m
5.0 to 20.5 ft-lbs
(1) Pilot Screw
(2) Pilot Jet
(3) Drain Screw (4) Throttle Adjust Screw
(5) Main Jet
(6) Gasoline Solenoid
KiSC issued 11, 2006 A