KTM Freeride 350 AU, Owner'S Manual, Page: 93 / 116

18 SERVICE WORK ON THE ENGINE
91
–
Start the engine and check that it is oil-tight.
Finishing work
–
Install the engine guard. ( p. 60)
–
Check the engine oil level. ( p. 88)
18.4 Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
M00533-10
Main work
–
Remove the oil filler plug

with the O-ring from the clutch cover.
–
Fill engine oil to the middle

of the level viewer.
Engine oil (SAE 10W/50) ( p. 104)
Engine oil (SAE 10W/60) (00062010035) ( p. 104)
Info
In order to achieve optimal engine performance, it is not advisable to mix
different engine oils.
We recommended changing the engine oil when necessary.
–
Install and tighten the oil filler plug with the O-ring.
Danger
Danger of poisoning
Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. ( p. 88)