manualshive.com logo in svg

KTM Freeride 350 AU, Owner'S Manual, Page: 37 / 116

Share
Download
KTM Freeride 350 AU Owner'S Manual Download Page 37

11

TUNING THE CHASSIS

35

11.12

Adjusting the compression damping of the fork

Info

The hydraulic compression damping determines the fork suspension behavior.

402496-10

–

Remove protection caps

.

–

Turn adjusting screws

clockwise all the way.

Info

Adjusting screws

are located at the bottom end of the fork legs.

Make the same adjustment on both fork legs.

–

Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline

Compression damping

Comfort

25 clicks

Standard

20 clicks

Sport

15 clicks

Info

Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.

–

Mount protection covers

.

11.13

Adjusting the rebound damping of the fork

Info

The hydraulic rebound damping determines the fork suspension behavior.

S00833-10

–

Turn adjusting screws

clockwise all the way.

Info

Adjusting screws

are located at the top end of the fork legs.

Make the same adjustment on both fork legs.

–

Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline

Rebound damping

Comfort

25 clicks

Standard

20 clicks

Sport

15 clicks

Info

Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.

Summary of Contents for Freeride 350 AU





















































































































Reviews:

No comments