15
ELECTRICAL SYSTEM
77
15.5
Changing the fuses of individual power consumers
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Fold the seat up. (
602809-10
Main work
–
Pull the EFI control unit
from the holder and hang it to one side.
–
Open fuse box cover
.
602810-10
–
Remove the defective fuse.
Guideline
Fuse
1
- 10 A - EFI control unit, lambda sensor, injection valve, speedometer,
diagnostics connector
Fuse
2
- 10 A - EFI control unit, fuel pump
Fuse
3
- 10 A - high beam, low beam, parking light, tail light, license plate lamp
Fuse
4
- 10 A - horn, turn signal, brake light, radiator fan
Fuses
res
- 10 A - spare fuses
Info
A defective fuse is indicated by a burned-out fuse wire
.
Warning
Fire hazard
The electrical system can be overloaded if the wrong fuses are
used.
–
Use only fuses with the prescribed amperage. Never bypass or repair
fuses.
–
Use spare fuses with the correct rating only.
Fuse (75011088010) (
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover.
–
Position the EFI control unit.
Finishing work
–
Lock the seat. (
