KTM Freeride 350 AU, Owner'S Manual

Page: 49 / 116

12 SERVICE WORK ON THE CHASSIS
47
12.23 Installing the air filter housing
M00506-10
Main work
–
Position pre-filter

on the air filter housing.
Note
Engine failure If the pre-filter is mounted incorrectly or not mounted at all, the
air-fuel mixture will change. This has a negative effect on the service life of the
engine.
–
Make sure the pre-filter is seated correctly.
–
Attach air filter housing  to the inlet flange together with the mounted pre-filter.
Info
If the air filter housing is not mounted correctly, dust and dirt may enter the
engine and cause damage.
Finishing work
–
Lock the seat. ( p. 45)
12.24 Removing the air filter
Note
Engine failure
Unfiltered intake air has a negative effect on the service life of the engine.
–
Never operate the vehicle without an air filter as dust and dirt will enter the engine and lead to increased wear.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Preparatory work
–
Fold the seat up. ( p. 45)
–
Remove the air filter housing. ( p. 46)
M01061-10
Main work
–
Take off pre-filter

.
–
Press the air filter housing

together and open in counterclockwise direction.
–
Remove the air filter  with the air filter support  .
–
Take off air filter

from air filter support

.
12.25 Installing the air filter
B01757-10
Main work
–
Mount the clean air filter onto the air filter support.
–
Apply grease to the air filter around area

.
Long-life grease ( p. 106)