KTM Freeride 350 AU, Owner'S Manual

Page: 81 / 116

15 ELECTRICAL SYSTEM
79
S00843-10
–
Position the headlight mask and secure it with rubber bands

.
The holding lugs on the fender engage in the headlight mask.
–
Attach the brake line and wiring harness

.
Finishing work
–
Check the headlight setting. ( p. 80)
15.8 Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 78)
602813-10
Main work
–
Turn rubber cap  together with the underlying bulb socket counterclockwise all
the way and remove it.
–
Pull bulb socket

of the parking light out of the reflector.
100862-10
–
Press headlight bulb

lightly into the bulb socket, turn it counterclockwise, and
pull it out.
–
Insert the new headlight bulb.
Headlight (S2/socket BA20d) ( p. 101)
–
Insert the rubber cap with the bulb socket into the reflector and turn it clockwise
all the way.
Info
Ensure that O-ring

is seated properly.
–
Insert the bulb socket of the parking light into the reflector.
Finishing work
–
Refit the headlight mask with the headlight. ( p. 78)
–
Check the headlight setting. ( p. 80)