KTM Freeride 350 AU, Owner'S Manual

Page: 78 / 116

15 ELECTRICAL SYSTEM
76
Guideline
The charging current, charging voltage, and charging time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
3 months
Finishing work
–
Install the battery. ( p. 74)
15.4 Changing the main fuse
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
–
Use only fuses with the prescribed amperage. Never bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located behind the battery.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Raise the motorcycle with the lift stand. ( p. 37)
–
Fold the seat up. ( p. 45)
–
Remove the shock absorber. ( p. 44)
M00525-10
Main work
–
Remove protection caps

.
M00526-10
–
Remove the faulty main fuse

.
Info
A defective fuse is indicated by a burned-out fuse wire

.
A reserve fuse

is located in the starter relay.
–
Install a new main fuse.
Fuse (58011109120) ( p. 101)
–
Check that the electrical equipment is functioning properly.
Tip
Insert the spare fuse so that it is available if needed.
–
Mount the protection caps.
Finishing work
–
Install the shock absorber. ( p. 44)
–
Lock the seat. ( p. 45)
–
Remove the motorcycle from the lift stand. ( p. 37)