12
SERVICE WORK ON THE CHASSIS
60
12.46
Removing the engine guard
B01072-10
–
Remove screws
and
.
–
Lower the engine guard at the rear and remove it toward the front.
12.47
Installing the engine guard
B01072-10
–
Position the engine guard on the frame at the front and mount screws
but do
not tighten yet.
–
Position the engine guard on the frame at the rear and mount and tighten
screws
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
–
Tighten screws
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
