KTM 2012 505 SX Owner'S Manual Download | Manualshive

Page: 141 / 197

background image

COOLING SYSTEM

139

Alternative 2

Coolant (mixed ready to use) (

–

Mount the radiator cap.

14.5

Draining coolant

x

Warning

Danger of scalding

The coolant gets very hot and is under high pressure when the vehicle is operated.

–

Do not remove the radiator cap or remove radiator hoses or other cooling system components when the engine is hot. Allow the
engine and cooling system to cool down. If you scald yourself, hold the affected area under lukewarm water immediately.

Warning

Danger of poisoning

Coolant is poisonous and a health hazard.

–

Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.

–

Remove the front trim. (

301837-10

–

Place a suitable container under the vehicle.

–

Remove screw

1

.

–

Remove screw

2

.

«
...
139
140
141
142
143
...
»

Summary of Contents for 2012 505 SX






































































































































































































Reviews:

No comments

Related manuals for 2012 505 SX

Brand: Landa Pages: 101

2000 TRX 350FE FourTrax Rancher 4x4 ES

Brand: Honda Pages: 178

Brand: Taylor-Dunn Pages: 134

YUM1A UMAX RALLY 2021

Brand: Yamaha Pages: 76

Brand: Yamaha Pages: 158

GRIZZLY YFM70GPAP 2023

Brand: Yamaha Pages: 180

KODIAK ULTRAMATIC YFM400FWAN 2000

Brand: Yamaha Pages: 184

Brand: Toro Pages: 28

Brand: Arctic Cat Pages: 64

Brand: Truxta Pages: 8

Brand: NorAM Pages: 118

Sportsman 850 2014

Brand: Polaris Pages: 154

Brand: Trail Rover Pages: 34

RANGER Diesel 2013

Brand: Polaris Pages: 97

Brand: Polaris Pages: 141

Brand: American Sportworks Pages: 13

Brand: Herculano Pages: 34

Brand: Ski-Doo Pages: 123

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands