KTM 2012 505 SX Owner'S Manual Download Page 84

Page: 84 / 197

MAINTENANCE WORK ON THE CHASSIS

Info

Only press the air filter to dry it; never wring it out.

–

Oil the dry air filter with a high/quality filter oil.

Oil for foam air filter (

p. 187)

–

Clean the air filter box.

–

Check carburetor connection boot for damage and tightness.

–

Install the air filter.

(

p. 80)

10.18

Checking the toe

–

Park the vehicle on a horizontal surface.

–

Check the tire condition. (

p. 127)

–

Check the tire air pressure. (

p. 128)

–

Check the chassis parts for damage, play and wear.

300272-10

–

Load the vehicle with the specified weight.
Guideline

Average rider weight

75… 85 kg (165… 187 lb.)

–

Move the handlebar into the straight-ahead position and fix it.

Handlebar fixation for straight-ahead position (83019015100)

Summary of Contents for 2012 505 SX






































































































































































































Search results

Summary of Contents for 2012 505 SX

Reviews:

KTM 2012 505 SX, Owner'S Manual, Page: 84 / 197

Search results

Summary of Contents for 2012 505 SX

Reviews: