KTM 2012 505 SX Owner'S Manual Download Page 62

Page: 62 / 197

TUNING THE CHASSIS

301790-10

–

Measure the cross over setting

between sliding bushing

and the collar of adjusting

ring

Guideline

Cross over

19±1.5 mm (0.75±0.059 in)

–

Adjust the sleeve by turning adjusting ring

to the specified measurement

–

Lock the adjusting rings.

–

Remove the vehicle from the lifting gear. (

p. 67)

9.11

Front shock absorber - adjusting the spring preload

Warning

Danger of accidents

Modifications to the suspension settings can seriously alter the vehicle's ride behavior.

–

Extreme modifications to the adjustment of the spring elements can cause a serious deterioration in the handling characteris-
tics and overload some components.

–

Only make adjustments within the recommended range.

–

After making adjustments, ride slowly at first to get the feel of the new ride behavior.

Caution

Danger of accidents

Disassembly of pressurized parts can lead to injury.

–

The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop will
be glad to help.)

Info

Increasing the spring preload raises the center of gravity of the vehicle. This can have a large impact on vehicle handling.

Summary of Contents for 2012 505 SX






































































































































































































Search results

Summary of Contents for 2012 505 SX

Reviews:

Related manuals for 2012 505 SX

Brands by name

Popular brands

KTM 2012 505 SX, Owner'S Manual

Search results

Summary of Contents for 2012 505 SX

Reviews:

Related manuals for 2012 505 SX

Brands by name

Popular brands