KTM 2012 505 SX Owner'S Manual Download Page 88

Page: 88 / 197

MAINTENANCE WORK ON THE CHASSIS

Info

The toe is the difference in length between distances

and

by which the wheels are spaced at the front or rear when driv-

ing straight ahead. The distance is measured at the height of the wheel center from rim flange to rim flange.

–

Tighten nuts

and

Guideline

Lock nut, tie rod, outside

M12x1.25

20 Nm (14.8 lbf ft)

Lock nut, tie rod, inside

M12LHx1.25

20 Nm (14.8 lbf ft)

Info

The tie rods

must still be freely movable.

10.20

Checking/adjusting the camber

Info

The left and right camber should have the same settings.
The operations are the same on the left and right.

–

Raise the vehicle with the lifting gear. (

p. 67)

Summary of Contents for 2012 505 SX






































































































































































































Search results

Summary of Contents for 2012 505 SX

Reviews:

Related manuals for 2012 505 SX

Brands by name

Popular brands

KTM 2012 505 SX, Owner'S Manual

Search results

Summary of Contents for 2012 505 SX

Reviews:

Related manuals for 2012 505 SX

Brands by name

Popular brands