KTM 2012 505 SX Owner'S Manual Download Page 86

Page: 86 / 197

MAINTENANCE WORK ON THE CHASSIS

Info

The toe is the difference in length between distances

and

by which the wheels are spaced at the front or rear when driv-

ing straight ahead. The distance is measured at the height of the wheel center from rim flange to rim flange.

» If the toe does not meet specifications:

–

Adjust the toe.

(

p. 84)

10.19

Adjusting the toe

–

Park the vehicle on a horizontal surface.

–

Check the tire condition. (

p. 127)

–

Check the tire air pressure. (

p. 128)

–

Check the chassis parts for damage, play and wear. Replace damaged or worn parts.

300272-10

–

Load the vehicle with the specified weight.
Guideline

Average rider weight

75… 85 kg (165… 187 lb.)

–

Move the handlebar into the straight-ahead position and fix it.

Handlebar fixation for straight-ahead position (83019015100)

Summary of Contents for 2012 505 SX






































































































































































































Search results

Summary of Contents for 2012 505 SX

Reviews:

KTM 2012 505 SX, Owner'S Manual, Page: 86 / 197

Search results

Summary of Contents for 2012 505 SX

Reviews: