1 Supplementary Operating Manual
6 of 28
Profibus module
Blind cover
1
1
Fig. 2:
Blind cover
1
Blind cover
1. Unscrew the cross recessed head screws in the blind cover.
2. Remove the blind cover.
Field bus module
Fig. 3:
Inserting the field
bus module
1. Carefully insert the field bus module into the open slot. The plug-in module is
guided on rails until it engages in the contact.
Fig. 4:
Securing the field bus
module
2. Secure the field bus module using the 4 cross recessed head screws. IP55
enclosure protection is not provided until the screws have been tightened.
CAUTION
Incorrect assembly
Impairment of protection provided by the enclosure (protection may be
compromised)!
▷
Cover unused M12 connections with a cap (included in the scope of supply).
Summary of Contents for Profibus PumpDrive 2
Page 1: ...Field Bus Module Profibus module PumpDrive 2 Supplementary Operating Manual...
Page 26: ......
Page 27: ......
