KSB Profibus PumpDrive 2, Supplementary Operating Manual

Page: 23 / 28

1 Supplementary Operating Manual
23 of 28
Profibus module
Offset byte. Bit Data type Error code Parameter name Comments PumpDrive 2 message
3.6 BOOL 0x901E DIA_AUX_DEVICE Auxiliary equipment diagnosis event -
3.7 BOOL 0x901F EXTENSION_AVAILA
BLE 1: Further error details are available in the
extended diagnosis. -
Table 13: Module PB/DIAGNOSIS_EXT_HARDWARE (PhysicalBlock.DIAGNOSIS_EXT_HARDWARE), input
Offset byte. Bit Data type Error code Parameter name Comments PumpDrive 2 message
0.0 BOOL 0x9101 HardwareFault 1: Hardware fault A6
0.1 BOOL 0x9102 PowerSupply 1: Power supply fault A21
0.2 BOOL 0x9103 DCLinkSupply 1: Undervoltage 24 V DC supply A22
0.3-1.3 BOOL 0x9104-0x910C - Not supported -
1.4-1.6 BOOL 0x9000,
0x910D-0x917F - Reserved by PI, fixed at 0 -
1.7 BOOL 0x9180-0x9182 Make-specific HMI hardware test not passed A98
IO hardware test not passed A99
24 V overload W76
Table 14: Module PB/DIAGNOSIS_EXT_SOFTWARE (PhysicalBlock.DIAGNOSIS_EXT_SOFTWARE), input
Offset byte. Bit Data type Error code Parameter name Comments PumpDrive 2 message
0.0-0.7 BOOL 0x9201-0x9208 Software Fault Not supported -
1.0-1.6 BOOL 0x9200,
0x920A-0x927F - Reserved by PI, fixed at 0 -
1.7 BOOL 0x9280-0x9285 Make-specific Firmware update required A12
No matching motor data available A18
No motor data available A19
Firmware update for field bus required W78
Firmware update for HMI required W79
General settings loaded W99
Table 15: Module PB/DIAGNOSIS_EXT_MECHANICS (PhysicalBlock.DIAGNOSIS_EXT_MECHANICS), input
Offset byte. Bit Data type Error code Parameter name Comments PumpDrive 2 message
0.0-1.5 BOOL 0x9301-0x930E - Not supported -
1.6 BOOL 0x930F BrakeChopper Braking resistor -
1.7 BOOL 0x9310 - Not supported -
2.0-2.6 BOOL 0x9300,
0x9311-0x937F - Reserved by PI, fixed at 0 -
2.7 BOOL 0x9380-0x93FF - Not supported -