KSB Profibus PumpDrive 2, Supplementary Operating Manual

Page: 24 / 28

1 Supplementary Operating Manual
24 of 28
Profibus module
Table 16: Module PB/DIAGNOSIS_EXT_ELECTRICS (PhysicalBlock.DIAGNOSIS_EXT_ELECTRICS), input
Offset byte. Bit Data type Error code Parameter name Comments PumpDrive 2 message
0.0 BOOL 0x9401 ElectricalFault Not supported -
0.1 BOOL 0x9402 InstallationFault Not supported -
0.2 BOOL 0x9403 SupplyVoltage Phase failure, mains side A23
0.3 BOOL 0x9404 SupplyVoltHigh Overvoltage A2, W51
0.4 BOOL 0x9405 SupplyVoltLow Undervoltage A3, W52
0.5 BOOL 0x9406 SupplyCurrent Not supported -
0.6 BOOL 0x9407 SupplyCurrHigh Current high W61
0.7 BOOL 0x9408 SupplyCurrLow Current low W62
1.0 BOOL 0x9409 SupplyFrequency Not supported -
1.1 BOOL 0x940A SupplyFreqHigh Frequency high W71
1.2 BOOL 0x940B SupplyFreqLow Frequency low W72
1.3 BOOL 0x940C PhaseFailure Phase failure, motor side A4
1.4 BOOL 0x940D VoltageInDevice Not supported -
1.5 BOOL 0x940E CurrentInDevice Overcurrent A9
1.6 BOOL 0x940F ShortToEarth Not supported -
1.7 BOOL 0x9410 ShortCircuit Short circuit A5
2.0 BOOL 0x9411 WindingTemp Not supported -
2.1 BOOL 0x9412 InsulationResist Not supported -
2.2 BOOL 0x9413 FieldCircuit Not supported -
2.3 BOOL 0x9414 ArmatureCircuit Not supported -
2.4-2.6 BOOL 0x9400,
0x9415-0x947F - Reserved by PI, fixed at 0 -
2.7 BOOL 0x9480-0x9485 Make-specific Dynamic overload protection A11, W50
AMA fault A20
Power high W73
Power low W74
Limited stop ramp W75
Drive disabled I101
Table 17: PB/DIAGNOSIS_EXT_PROC_LIQUID (PhysicalBlock.DIAGNOSIS_EXT_LIQUID), input
Offset byte. Bit Data type Error code Parameter name Comments PumpDrive 2 message
0.0-0.2 BOOL 0x9501-0x9503 - Not supported -
0.3 BOOL 0x9504 Dry Dry running A13
0.4 BOOL 0x9505 Blockage Hydraulic blockage A15, W56
0.5-1.2 BOOL 0x9507-0x950B - Not supported -
1.3-1.6 BOOL 0x9500,
0x950C-0x957F - Reserved by PI, fixed at 0 -
1.7 BOOL 0x9580-0x9581 Make-specific Dry running (external) A14
Lack of water A17