KSB Delta Primo F, Installation And Operating Manual

Page: 32 / 80

7 Operation
32 of 80
KSB Delta Primo
1983.811/02-EN
Main menu Key Submenu Menu display
➡ Settings ➡ Pressure configuration ▪ Configuration setpoint
▪ Configuration dry running protection
➡ Timer settings ▪ Functional check run
▪
Alternative setpoint
➡ Time/date
➡ Program outputs
➡
Messages
➡
Main menu
➡ Information ➡ Control module ▪ Serial number
▪ Material number
▪ Firmware
▪
Parameter set
▪ Hardware version
7.3 Quick menu
The Quick Menu allows access to the main parameters which may be required for
adapting the pressure booster system to site conditions. Press OK to call up the Quick
Menu from the start screen.
▪
PIN
▪ Proportional constant
▪ Integral constant
▪ Differential constant
▪
Setpoint
▪ Bandwidth
▪ Accumulator pressure
▪
Delta P correction (dynamic pressure compensation)
▪
High pressure alert
▪ Low pressure alert
▪ Minimum runtime
▪
Start delay
▪ Stop delay
▪ RDP delay
▪ High/low alert delay
7.4 Access levels
Various access levels have been defined to prevent unintentional or unauthorised
access to the pressure booster system parameters.
"Standard" level Unless users log on to one of the other access levels, they will only have limited access
to parameters.
"Customer" level Access level for expert users.
This level enables access to all the parameters required for commissioning. You must
enter the password under (3-2-1-1) Login to gain access.
"C" is displayed.
If password protection is deactivated via parameter 3-2-1-2, this access level becomes
the "Standard" access level.
The password is "7353".
"Service" level Access level for service personnel.
You must enter the password under (3-2-1-1) Login to gain access.
"S" is displayed.
"Factory" level Access level for the manufacturer only.
"F" is displayed.