KSB Delta Primo F, Installation And Operating Manual

Page: 72 / 80

10 Related Documents
72 of 80
KSB Delta Primo
1983.811/02-EN
Fault message Description Type of message
Warning Alert
Temp. Failure P6 Temperature too high, frequency inverter 6 ✘ -
ATM Failure P1 Automatic motor adaptation fault, frequency inverter 1 ✘ -
ATM Failure P2 Automatic motor adaptation fault, frequency inverter 2 ✘ -
ATM Failure P3 Automatic motor adaptation fault, frequency inverter 3 ✘ -
ATM Failure P4 Automatic motor adaptation fault, frequency inverter 4 ✘ -
ATM Failure P5 Automatic motor adaptation fault, frequency inverter 5
✘
-
ATM Failure P6 Automatic motor adaptation fault, frequency inverter 6
✘
-
Flushing Flushing procedure active
✘
-
Valve opened oftenly Several flushing procedures carried out ✘ -
Circuit Fail. FC1 Short circuit fault/earth fault, frequency inverter 1 ✘ -
Circuit Fail. FC2 Short circuit fault/earth fault, frequency inverter 2 ✘ -
Circuit Fail. FC3 Short circuit fault/earth fault, frequency inverter 3 ✘ -
Circuit Fail. FC4 Short circuit fault/earth fault, frequency inverter 4 ✘ -
Circuit Fail. FC5 Short circuit fault/earth fault, frequency inverter 5 ✘ -
Circuit Fail. FC6 Short circuit fault/earth fault, frequency inverter 6 ✘ -
Ext. Power Operation Emergency power mode active; maximum system load
limited
✘
-
Setpoint Reduction Setpoint reduced due to drop in inlet pressure ✘ -
Factory Test No test carried out in factory - ✘
MPO Failure Fault in VP mode, synchronous operation ✘ -
ASR Shutdown Cancellation of automatic setpoint reduction -
✘