KSB Delta Primo F, Installation And Operating Manual

Page: 53 / 80

10 Related Documents
53 of 80
KSB Delta Primo
1983.811/02-EN
Parameter Description Factory setting Possible
settings Min.
value Max.
value Read access
right Write access
right
1-1-3
RDP switch
Detection of dry running
protection via pressure
switch is activated/
deactivated.
- Not available,
available - - Everybody Nobody
1-1-4 Inlet pressure
Displaying the suction-side
pressure
- - - - Everybody Nobody
1-1-5 Level content in %
Displaying the water level in
inlet tank in percent
- - - - Everybody Nobody
1-1-6 Level height
Displaying the water level in
the inlet tank
- - - - Everybody Nobody
1-1-7 Ambient temp. (WSD)
Displaying the measured
ambient temperature if water
flow detection is available
- - - - Everybody Nobody
1-1-8 Digital inputs
Displaying the status of the
digital inputs
- - - - Service Service
1-1-9.2 Position suppl.valve
Position of supply valve
Open Open,
closed - - Everybody Nobody
1-1-9.1 Position suppl.valve
Position of proportional
supply valve 0 % ... 100 %
0 0...100 0 100 Everybody Nobody
1-1-10 Power down speed
Calculated stop speed if
zero-flow detection is
activated in energy-saving
mode
- - - - Service Nobody
1-1-14 WSD pulses tank 1
Water flow detection,
number of fills in tank 1
0 - - - Everybody Nobody
1-1-15 WSD pulses tank 2
Water flow detection,
number of fills in tank 2
0 - - - Everybody Nobody
1-1-16 WSD pulses tank 3
Water flow detection,
number of fills in tank 3
0 - - - Everybody Nobody
1-2
Pumps
Pump-relevant status
information
- - - - Everybody Nobody
1-2-1 Operating mode
Setting the operating mode
for each individual pump
- - - - Everybody Everybody
1-2-1.1.1 Pump number
Entering the pump number
for which the operating
mode is configured
1 1.. 3 1 3 Everybody Everybody
1-2-1.2.1
Operating mode
Displaying the operating
status of the pump
1 Automatic,
manual On
(10 s),
manual Off - - Everybody Everybody
1-2-2 Pump load
Displaying the pump load
- - - - Everybody Nobody
1-2-3 Thermal fail. flags
Bit-based display of status of
all thermal fault inputs
- Not tripped
Tripped - - Service Nobody
1-2-4 Running hours pump
Displaying the operating
hours per pump
- - - - Everybody Nobody