KSB Delta Primo F, Installation And Operating Manual

Page: 63 / 80

10 Related Documents
63 of 80
KSB Delta Primo
1983.811/02-EN
Parameter Description Factory setting Possible
settings Min.
value Max.
value Read access
right Write access
right
3-6-4
Max. run time
After the time has lapsed,
the system switches over to
the next pump.
86400 0.. 604800 0 604800 Everybody Service
3-6-5 Start delay
Start delay of pumps if
pressure remains below
setpoint
t
1 0.. 999 0 999 Everybody Service
3-6-6 Stop delay
Stop delay of pumps if
pressure remains at setpoint
1 0.. 999 0 999 Everybody Service
3-6-8 RDP delay
Stop delay following
detection of dry running
occurrence
10 0.. 999 0 999 Everybody Service
3-6-9 High/low alarm delay
Time window for
suppressing alerts when
system pressure is
exceeded/undershot
60 10.. 999 10 999 Everybody Service
3-6-10 WSD 1 pulse length
Water flow detection 1,
length of pulse in seconds
4 0.. 99 0 99 Everybody Service
3-6-11 WSD 2 pulse length
Water flow detection 2,
length of pulse in seconds
4 0.. 99 0 99 Everybody Service
3-6-12 WSD 3 pulse length
Water flow detection 3,
length of pulse in seconds
4 0.. 99 0 99 Everybody Service
3-6-13
Sys. start up delay
Start delay following re-start
10 0.. 32 0 32 Service Service
3-7 Time/Date
Date and time
- - - - Everybody Nobody
3-7-1 Date
Setting the date
- - - - Everybody Customer
3-7-1.1.1 Year
Setting the year
... 1970.. 2099 1970 2099 Everybody Customer
3-7-1.1.2 Month
Setting the month
1 1.. 12 1 12 Everybody Customer
3-7-1.1.3
Day
Setting the day
1 1.. 31 1 31 Everybody Customer
3-7-2 Time
Setting the time
- - - - Everybody Customer
3-7-2.1.1 Time
Setting the time in the format
HH:MM:SS
0 0.. 86399 0 86399 Everybody Customer
3-7-3 Check run mode
Basic setting for forced start
(check run)
Interval Off,
digital input,
interval,
day-based,
week-based - - Everybody Customer
3-7-4 Check run interval
Interval-controlled forced
start (check run);
the pumps are started at
fixed, defined intervals.
86400 0.. 1000000 0 1000000 Everybody Service
3-7-5 Check run at
Day-controlled forced start
(check run);
the pumps are started at a
defined time
- - - - Everybody Customer
3-7-5.1.1
Hours
Hours for daily forced start
(check run)
0 0.. 23 0 23 Everybody Customer