7 Servicing/Maintenance
74 of 126
Amacan S
1589.837/01-EN
7.6.4.2 Impeller-end mechanical seal
932.44
550.44
433.02
Fig. 43:
Impeller-end mechanical seal
ü
The pump casing has been fastened to the motor.
ü
The pump has been positioned horizontally on a wooden support. It has been
secured against rolling off. (
1. Use an assembly sleeve of a suitable diameter to press the mating ring of
mechanical seal 433.02 together with the O-ring into the drilled recess in the
pump casing.
2. Carefully guide on the bellows part of the mechanical seal until it rests against
the mating ring.
3. Guide disc 550.44 and circlip 932.44 onto the shaft. Press the circlip in with an
assembly sleeve until it is axially fastened to the shaft groove.
4. Check the lubricant reservoir for leakage.
5. Fill the lubricant reservoir with lubricant. Then close the lubricant reservoir.
Summary of Contents for Amacan S 1000-600
Page 125: ......
