Krone TITAN 6/36 D, Operating Instructions Manual, Page: 45 / 64

45
Conveyor chain 6
Connecting rod for conveyor chain, rechenseitig 6
Connecting rod for conveyor chain, kurbelwellenseitig 2
Double chain wheel for pick-up drive 1
Transverse shaft to drive, left side 1
Floor conveyor shaft, front 2
" , rear 2
Cam track, pick-up left 1
Feeler wheel arms 2
Parking leg 1
Parking brake (air brake only) 1
Tandem axle: Brake lever bearing (right/left) 4
Brake shaft bearing (right/left) 4
Axle swinging-arm (right/left) 2
Bowden cable (right/left) 2
Drive shaft for metering rollers lateral left 2 / 3*
Important lubrication points
Lubrication points (Titan 6/40 L/GL; 6/48 L/GL)
only with
compressed
air brake
}
Number of lubrication nipples
The following table lists the most important lubrication points on the forage wagon and the number of lubrication
nipples.
For greasing, use soft ductile lime soap grease or
lithium base grease with penetration class 2 or 3
according to DIN 51825. We advise against using
lubricating greases based on other systems.
If it is necessary to use a special oil, the
specification must be indicated on the
part in question.
Aralub Energrease Unedo
BP
Aralub Energrease Alvania
Shell
FM 2 or 3
Aral
PR 2 or 3
LS 2 or 3 R2 or 3 HL 2 or 3
Lithium
base
grease
2 or 3
Lime soap
grease
If possible, use biologically degradable
oil (plant-based) for oiling the drive
chains and floor conveyor chain.
Use normal SAE 30 lubricating oil.
Oil for
claw clutch
* only Titan 6/42 GD "all in"