Krone 4XL-RGL Operating Instructions Manual Download Page 82

Page: 82 / 88

A - 8

Appendix

KDW04211

Installing the front tarpaulin

•

Suspend the eyes from the hooks (4) on the front
panel.

The two outer hooks each take two eyes.

1. To do this, fold the tarpaulin upwards and over on one

side and place the eyes (1) in the hooks (2).

2. Next, place the rope ends on the hooks.

The two outer hooks (2) each take two rope
ends (3).

A1.3.1 Installing the ropes

•

Starting from the back, guide the rope (2) through the
eyes (1) of the tubular hoops.

•

From below, guide the rope through the eyelets in the
tarpaulin and place it on the hooks on the front panel.

The two outer ropes are also threaded
through the two side eyelets in the
tarpaulin.

•

Lay the tension ropes (3) and (4) round the front tubular
hoop.

•

Hook the tension rope hooks (3) and (4) in the eyelets
of the tarpaulin.

KLW07191

Summary of Contents for 4XL-RGL

























































































Search results

Summary of Contents for 4XL-RGL

Reviews:

Related manuals for 4XL-RGL

Brands by name

Popular brands

Krone 4XL-RGL, Operating Instructions Manual

Search results

Summary of Contents for 4XL-RGL

Reviews:

Related manuals for 4XL-RGL

Brands by name

Popular brands