Krone 4XL-RGL Operating Instructions Manual Download Page 24

Page: 24 / 88

III - 4

Operation

Connection for operator-friendly control unit

Mount the operator-friendly control unit on the tractor within
the field of view of the driver.

Connect the operator-friendly control unit to the on-board
computer.

Plug the control cable (1) into the socket (2) of the
operator-friendly control unit.

Secure the connection with the union nut (4).

Connect the power supply cable (12 V) for the operator-
friendly control unit to the 3-way power socket on the
tractor.

3.4.3 Compressed air connections for air

brakes (special equipment)

Plug the coloured couplings of the compressed air hoses
(1) into the couplings with the corresponding colours on the
tractor.

First connect the yellow coupling and then
the red coupling. Disconnection is carried
out in the reverse order.

•

Arrange the cable connections between the tractor and the short-stalk loading wagon so

that they are not under tension when the vehicles are turning and so that they do not come
into contact with the wheels of the tractor.

BPA02300

KLWOA-01

Summary of Contents for 4XL-RGL

























































































Search results

Summary of Contents for 4XL-RGL

Reviews:

Related manuals for 4XL-RGL

Brands by name

Popular brands

Krone 4XL-RGL, Operating Instructions Manual

Search results

Summary of Contents for 4XL-RGL

Reviews:

Related manuals for 4XL-RGL

Brands by name

Popular brands