OPERATION
5
23
OPTISENS TSS 2000
www.krohne.com
07/2018 - 4006304401 - OPTISENS TSS 2000 en R01
5.2.3 Menu C, setup
INFORMATION!
Note that the appearance of some sub-menus depends on the hardware setting.
Function
Settings / descriptions
C1 process
input A
C1.1 parameter
TSS 2000
C1.28 temperature offset
Manual setting of the temperature.
C1.29 product cal.
This menu allows to calibrate the sensor and change the corresponding
settings.
C3 I/O
C3.1 hardware
This sub-menu allows to select different settings of the output terminals.
The menus for the different terminals are identical, if they have the same
function (e.g. the menus of all status outputs are identical). Note that a
change of the configuration is completely available after returning to the
measuring mode (leave the menu, accepting the changes)! The menu
structure of the changed output will be immediately available after returning
to the measuring mode. Parameters can be set immediately as well, but
simulations and test functions will be functional after restart.
C3.1.1 terminals A
Setting for current output A, B or C.
Options: current output (current
output active) / off (no function at
terminals).
C3.1.2 terminals B
C3.1.3 terminals C
C3.1.4 terminals D
Setting for control input.
Options: control input (control input
active) / off (no function at
terminals).
C3.1.5 terminals R1
Setting for status output or limit
switch (R1, R2 or R3, if existent).
Options:
•
status output: status output active
•
limit switch: limit switch active
•
off: no function at terminals
C3.1.6 terminals R2
C3.1.7 terminals R3
