6
SERVICE
40
OPTISENS TSS 2000
www.krohne.com
07/2018 - 4006304401 - OPTISENS TSS 2000 en R01
6.1 Maintenance
6.1.1 Availability of services
The manufacturer offers a range of services to support the customer after expiration of the
warranty. These include repair, maintenance, technical support and training.
6.1.2 Spare parts availability
The manufacturer adheres to the basic principle that functionally adequate spare parts for each
device or each important accessory part will be kept available for a period of 3 years after
delivery of the last production run for the device.
This regulation only applies to spare parts which are subject to wear and tear under normal
operating conditions.
6.1.3 Cleaning
•
Dirt deposits on the measurement window may lead to erroneous results.
•
Rinse the device thoroughly with tap water and only use a soft tissue to carefully remove
deposits from the measurement window.
•
The sensor housing may be cleaned by scrubbing it with a suitable brush. Make sure you do
not touch or scratch the measurement window.
6.1.4 Recalibration
It is recommended to check the sensor in regular intervals. For further information refer to
Calibration
on page 32.
INFORMATION!
For more precise information, please contact your local sales office.
INFORMATION!
The life time expectation of the sensor depends heavily on the application and on the properties
of the medium (e.g. aggressive chemicals).
