ELECTRICAL CONNECTIONS
3
39
OPTIFLEX X200
www.krohne.com
09/2018 - 4006564001 - AD IECEX OPTIFLEX x200 R01 en
3.2.2 How to close the terminal compartment
Equipment needed
•
Strap wrench (supplied)
•
Ex i-approved devices with one output:
Ex i-approved devices with one output:
Ex i-approved devices with one output:
Ex i-approved devices with one output: 3 mm Allen wrench (not supplied)
•
Ex d- / Ex t- / Ex nA-approved devices or Ex i-approved devices with the optional second
Ex d- / Ex t- / Ex nA-approved devices or Ex i-approved devices with the optional second
Ex d- / Ex t- / Ex nA-approved devices or Ex i-approved devices with the optional second
Ex d- / Ex t- / Ex nA-approved devices or Ex i-approved devices with the optional second
output or relay:
output or relay:
output or relay:
output or relay: 2.5 mm Allen wrench (not supplied)
•
Put the cover on the housing and push it down.
•
Turn the cover clockwise until it is fully engaged.
Open the terminal compartment cover (Ex d- / Ex t- / Ex nA-approved devices or
Ex i-approved devices with the optional second output or relay)
Figure 3-2: How to open the terminal compartment cover for Ex d- / Ex t- / Ex nA-approved devices or Ex i-approved
devices with the optional second output or relay
INFORMATION!
The compact converter (C) version of the device is shown in the procedures that follow. These
procedures are also applicable for the compact converter with sensor extension, remote
converter and remote converter with sensor extension versions of the device.
Close the terminal compartment cover (Ex i-approved devices with one output)
Figure 3-3: How to close the terminal compartment cover for Ex i-approved devices with one output
