1
SAFETY INSTRUCTIONS
8
H250 M40
www.krohne.com
03/2020 - 4000640706 - MA H250-M40 R06 en
1.3 Certifications
The device fulfils all applicable statutory requirements of the EU directives:
•
Pressure equipment directive
•
For devices with electrical installations: EMC directive
•
Devices for use in hazardous areas: ATEX directive
as well as
•
NAMUR recommendations NE 21, NE 43 and NE 107
The manufacturer certifies successful testing of the product by applying the CE marking.
An EU declaration of conformity regarding the directives in question and the associated
harmonised standards can be downloaded from our internet site.
1.4 Pressure equipment directive
A conformity assessment in accordance with pressure equipment directive has been carried out
for the devices described. Conformity is certified by applying the CE mark. The number of the
notified body is also stated.
The PED key describes the rating of the devices:
The PED key identification can be found on the nameplate of the device (for details refer to
Nameplate
on page 18).
CE marking
Example: PED/G1/III/H
G
Gases and vapours
1
Fluid group 1
III
Category III
H
Conformity assessment method according to Module H
Table 1-2: Example of PED key
INFORMATION!
The stated pressures (PS) and temperatures (TS) only apply as refers to the pressure resistance
of the sensor body. As regards the functionality of the entire device, further restrictions of the
maximum temperature may need to be observed (e.g. ATEX approval). Devices rated below
category I due to their size, do not receive the CE mark in the scope of the PED. These devices
are subject to applicable sound engineering practice (SEP).
