63
Step 4
Adjust the position of the base braces
so that the erected fold-ing unit can be
placed on them. Secure the connec-
tions with gravity pins. Firmly tighten
the nuts at the base braces. Using a
spirit level, check the scaffold for pro-
per vertical and horizontal alignment of
both its short and long sides. To adjust
the height at the castors, proceed as
shown in the figures below.
Summary of Contents for ProTec XS
