55
Assembly
Insert the screws through the joint
pieces of the vertical frame sections
and place the large washers over the
screws. Insert the bushing through
the boreholes of the folding frame as
shown in the picture to the left.
Bushing
Screw with washer
Lock nut an
small washer
Larger washer
Screw
Pull the screw slightly back and place
the folding section between the two
joint pieces attached to the vertical
frame.
Push the screws through the bushings.
Secure the folding section by tightening
the lock nuts with the small washers.
Tools required: size 13 wrench;
tightening torque: 20 Nm.
Summary of Contents for ProTec XS
