71
4.6 Installation options
The 4 feet of the outrig-gers must be
placed on firm ground. If necessary,
use sturdy base inserts.
NOTE:
The outriggers feature telescopic base
plates that can be adjusted from 75 to
25 mm and secured with a gravity pin.
Installation option with outriggers
Mount the outriggers as shown in
the picture to the left. The securing
couplings with shells of the outriggers
are designed to prevent torsion and
twisting and must be hand-tightened.
The outriggers must be mounted at an
angle of approx 30° to the stabiliser
(see picture below).
Summary of Contents for ProTec XS
