66
Step 8
Install a temporary working platform
made from sturdy planks.
Ensure that you are standing safely and
have the platform handed up to you.
Place the platform on the temporary
working plat-form to reduce the risk of
accidents.
NOTE:
To erect and dismantle the scaffold, you
must install temporary working platforms.
These plat-forms are made from planks
and must be removed after completion of
the installation or disassembly. According
to DIN EN 12811-1, the planks used for
tempo-rary work-ing platforms must have
a width of minimum 20 cm and a thick-
ness of minimum 4 cm. They must extend
by at least 50 cm on both sides of the
scaffold.
Step 9
Attach the platform to the top rungs of
the vertical frames, using the openings
provided. Secure it by tightening the
previously mounted securing kits.
Summary of Contents for ProTec XS
