![background image](http://html1.mh-extra.com/html/kramer/vsm-4x4hfs/vsm-4x4hfs_user-manual_2001468019.webp)
14
VSM-4x4HFS - Connecting and Operating the VSM-4x4HFS
5.3
The Dual Mode
In the Dual operation mode the
VSM-4x4HFS
is set as a 4x2 switcher with picture-in-
picture capabilities that outputs two identical A outputs and two identical B outputs
(see
Figure 7
).
The dual outputs display any two selected input signals together on one screen.
The OSD/IR remote control transmitter/Web pages lets you set the DUAL mode to
the POP (side-by-side) or PIP (picture-in-picture) mode.
5.3.1
Connecting the VSM-4x4HFS in the Dual Operation Mode
To connect in the Dual mode as illustrated in
Figure 7
, do the following:
1. Connect an HDMI source (for example, a Blu-ray disk player) to the INPUT 1
connector (from 1 to 4), not shown in
Figure 7
.
2. Connect the HDMI output connectors as follows. Connect the:
DUAL A connector to an HDMI acceptor (for example, an LCD display)
DUAL A connector to an HDMI acceptor (for example, an LCD display)
DUAL B connector to an HDMI acceptor (for example, an LCD display)
DUAL B connector to an HDMI acceptor (for example, an LCD display)
Note that you do not have to connect all the outputs.
3. Connect the power cord (not shown in
Figure 7
).
4. Setup the system (see
Section
5.3
)
5. If required, connect:
A PC via RS-232, see
Section
6.3
The ETHERNET port, see
Section
6.4
Summary of Contents for VSM-4x4HFS
Page 2: ......
Page 3: ......
Page 43: ...38 VSM 4x4HFS Controlling the VSM 4x4HFS...
Page 84: ......