Kramer VSM-4x4HFS, User Manual

Page: 24 / 85

VSM-4x4HFS - Controlling the VSM-4x4HFS 19
19
6.1.1 Switching Inputs to Outputs
The switching procedures are different for each of the four operation modes. Note
that incomplete operations on the VSM-4x4HFS timeout after 15 seconds.
Matrix Mode
To switch an input to an output in the Matrix mode:
1. Press the required OUTPUT/WINDOW button.
The selected button illuminates.
2. Press an INPUT button to select the input to switch to the output.
You can also switch several inputs and outputs using the TAKE button (see Section
6.1.2
).
Video Wall Mode
To switch an input to the output, press an input button (from 1 to 4). The selected
image appears on the video wall.
The audio input signal is routed to one of the four displays.
Dual Mode
POP Mode : select the inputs to switch to the LEFT and RIGHT images for each of
the two dual groups (two A outputs and two B outputs).
PIP Mode : select the inputs to switch to the MAIN and PIP images for each of the
two dual groups (two A outputs and two B outputs).
To select the images for group A (POP/PIP) using the front panel buttons:
1. Press OUTPUT A (or OUTPUT B).
The selected button illuminates.
2. Press an INPUT button (from 1 to 4) to select the left/main image on the
output.
3. Press an INPUT button (from 1 to 4) to select the right/PIP image on the
output.