Kramer VSM-4x4HFS, User Manual

Page: 25 / 85

20 VSM-4x4HFS - Controlling the VSM-4x4HFS
To select the images for group B (POP/PIP) using the front panel buttons:
1. Press OUTPUT C (or OUTPUT D).
The selected button illuminates.
2. Press an INPUT button (from 1 to 4) to select the left/main image on the
output.
3. Press an INPUT button (from 1 to 4) to select the right/PIP image on the
output.
The audio signal of the input selected first (the left/main image) will be routed to the
output.
QUAD Mode
In the QUAD mode there are no input/output switching operations since all the
inputs appear on each output in a preset order.
6.1.1.1 Switching an Input to all Outputs
This feature is available for all operation modes except the video wall mode
To switch an input to all the outputs:
1. Press the ALL button.
2. Press an INPUT button to select the input to switch to all outputs.
The selected input is switched to all outputs.
6.1.1.2 Disconnecting an Input from an Output
To disconnect an input from an output:
1. Press the required OUTPUT button.
The selected output Illuminates.
2. Press the OFF button.
The selected output is disconnected.